From April 1, the French government will reduce fuel taxes slightly to ease the burden on consumers.
Mr. Carenko, the head of the Commission de Regulation de L 'Energie, warned of possible energy shortages in France by the end of the year and called on the French to conserve electricity and gas from now on, saying that if nothing was done, The energy situation will be tough this winter. Some experts say that there are two main reasons for France's energy crisis: first, the conflict between Russia and Ukraine affected the gas market and caused supply tension; The second is a safety review of France's newest nuclear power plant, which may lead to a reduction in output this year. In order to alleviate the energy crisis, the whole French society needs to be mobilized, whether it is the industrial sector, the tertiary sector or every French citizen. Now it is urgent. Rising fuel prices may also have an impact on shipments of the natural graphite.
According to the above analysis and discussion, the author believes that when using natural graphite as raw material to develop artificial graphite, the following issues need to be paid attention to in terms of technology:
Surface modification of natural graphite. Compared with carbonaceous materials such as petroleum coke and pitch coke, natural graphite has fewer oxygen-containing functional groups on the surface, lower activity, and poorer binding force than coal tar pitch.
Therefore, with natural graphite, especially natural flake graphite as the main raw material, the carbon graphite products prepared according to the artificial graphite production process inevitably have the problem of poor mechanical properties. Appropriate surface treatment of natural graphite is required to increase the content of oxygen-containing functional groups on its surface.
Purification of natural graphite. The purity of carbonaceous raw materials such as petroleum coke and pitch coke is relatively high, and the ash content is usually less than 0.5%, while the purity of natural graphite treated by flotation is relatively low, and the carbon content is usually below 90%.
Therefore, carbon graphite products prepared from natural graphite are often limited in their application fields due to their low purity and poor comprehensive performance. High purification treatment of natural graphite is one of the ways to solve this problem.
The cost of chemical purification is low, but the water consumption in the washing process is large and the pollution is large, while high-temperature purification has the problem of high cost. Some people also think that block graphite can be prepared according to the production process of artificial graphite, and then subjected to high-temperature heat treatment above 2500 ℃.
While the "carbon" phase is graphitized, the impurities in the natural graphite phase are removed, but firstly, the production cost is increased, and secondly, the defects formed after the gasification of impurities often cause the performance of the product to decline.
The particle size of natural graphite. To improve process performance and product performance, in addition to fine-structure carbon-graphite products, most carbon-graphite products need to use different grades of carbonaceous raw materials in the batching process. For some large-sized products, the particle size of carbonaceous raw materials even reaches The flotation-treated natural graphite is often in the form of a fine powder, and the particle size is only tens to hundreds of microns. Therefore, the use of natural graphite as a raw material is limited to the preparation of fine-structure carbon graphite products.
Although natural microcrystalline graphite with different particle sizes can be obtained, due to its low purity and high cost of high-temperature purification, there is no report on the preparation of coarse-structure carbon graphite products using natural microcrystalline graphite as raw material. To solve the problem of the lack of large particles of natural graphite, it is recommended to use the "secondary coke" process in the treatment of carbon black raw materials in the artificial graphite industry.
Volume shrinkage during preparation. In the preparation process of artificial graphite, especially in the graphitization process, since the arrangement of carbon atoms gradually changes to a regular graphite structure, the volume shrinkage of the product is relatively large.
The advantage of this volume shrinkage is that it can increase the density of the product, but when the shrinkage is uneven, it is easy to cause the product to crack. When natural graphite is used as raw material, the density and mechanical properties of the product are lower due to the smaller volume shrinkage during carbonization and graphitization.
In addition, when developing artificial graphite with natural graphite as raw material, it is also necessary to consider the issue of comprehensive production cost.
Since the price of flotation natural graphite is similar to that of calcined petroleum coke and pitch coke, and then purified to a carbon content of 98%, the price of natural graphite is nearly twice that of calcined petroleum coke and pitch coke. In addition to the above-mentioned several carbon graphite products that have formed a large industry, the proposal of most technical routes and technical measures will greatly increase the production cost.
High quality graphite manufacturer
Luoyang Moon & Star New Energy Technology Co., LTD, founded on October 17, 2008, is a high-tech enterprise committed to the research and development, production, processing, sales and technical services of lithium ion battery anode materials. After more than 10 years of development, the company has gradually developed into a diversified product structure with natural graphite, artificial graphite, composite graphite, intermediate phase and other negative materials (silicon carbon materials, etc.). The products are widely used in high-end lithium ion digital, power and energy storage batteries.
If you are looking for graphite or lithium battery anode material, click on the needed products and send us an inquiry：firstname.lastname@example.org
A preparation developed in China; the comfort and the multifunctional properties of nanomaterials make "dead skin" capable of sensing again. Electronic skin is artificial skin that mimics the function of human skin. Recently, the world-renowned journal Advanced Science reported a simple and highly programmable electronic skin on a leather substrate developed by a Chinese team, which combines the natural complex structure of leather, the comfort of wearing, and the multi-functional properties of nanomaterials. , so that the "dead skin" has the ability to sense again.
In the future, natural graphite will be used in various high-tech fields, and the market demand for natural graphite will also be great. Please contact us for more information on natural graphite.
In terms of international pricing benchmarks, according to the CP data released by Saudi Aramco, the propane contract price (CP) in March was $895 / ton, up $120 / ton from the previous month, up 15.48% from the previous month and up 43.20% from the…
The roble had hit a record low after the West imposed sweeping sanctions on Russia for its aggression in Ukraine. Russia's president recently ordered exports of Russian gas to "unfriendly" countries to be settled in robles. The speaker of Russia's up…
Rio de Janeiro, Brazil -- Vale today announced that it has completed a pre-feasibility study for its proposed nickel sulfate project in Quebec, Canada, a major milestone in the development of the project. This strategic move demonstrates vale's focus…